Papers in 2002


  1. T. Aizawa, T. Akhadejdamrong, C. Iwamoto, Y. Ikuhara, and A. Mitsuo, “Self-lubrication of chlorine-implanted titanium nitride coating,”
    J. Ame. Ceram. Soc., 85[1], 21-24(2002).

  2. T. Akhadejdamrong, A. Mitsuo, C. Iwamoto, T. Yamamoto, Y. Ikuhara, and T. Aizawa, “Formation of protection layer during oxidation of Al-implanted TiN coating,”
    Mat. Trans., 43[6], 1291-1297(2002).

  3. T. Araki, I. Hirabayashi, J. Shibata, and Y. Ikuhara, "High critical current density scheme of YBa2Cu3O7-x films by metalorganic deposition using trifluoroacetates,”
    Supercond. Sci. Technol., 15[6], 913-916(2002).

  4. T. Araki, T. Niwa, Y. Yamada, I. Hirabayashi, J. Shibata, Y. Ikuhara, K. Kato, T. Kato, and T. Hirayama, “Growth model and the effect of CuO nanocrystallites on the properties of chemically derived epitaxial thin films of YBa2Cu3O7-x,”
    J. Appl. Phys., 92[6], 3318-3325(2002).

  5. Z. L. Hong, H. Yoshida, Y. Ikuhara, T. Sakuma, T. Nishimura, and M. Mitomo, “The effect of additives on sintering behavior and strength retention in silicon nitride with RE-disilicate,”
    J. Eur. Ceram. Soc., 22[4], 527-534(2002).

  6. T. Honjo, H. Fuji, Y. Nakamura, T. Izumi, Y. Shiohara, J. Shibata, T. Yamamoto, Y. Ikuhara, R. Teranishi, and M. Yoshimura, “Growth mechanism of Y123 film by MOD-TFA method,”
    J. Jpn Inst. Met., 66[3], 151-154(2002).

  7. Y. Ikuhara, and I. Tanaka, “Special issue on grain boundaries, interfaces, defects and localized quantum structures in ceramics - Preface,”
    Materials Transactions, 43[7], 1425-1425(2002).

  8. Y. Ikuhara, “Towards new transmission electron microscopy in advanced ceramics,”
    J. Ceram. Soc. Jpn, 110[3], 139-145(2002).

  9. Y. H. Ikuhara, X. L. Ma, Y. Iwamoto, Y. Ikuhara, K. Kikuta, and S. Hirano, “Interfaces between solution-derived LiMn2O4 thin films and MgO and Au/MgO substrates,”
    J. Mater. Res., 17[2], 358-366(2002).

  10. C. Iwamoto, X. Q. Shen, H. Okumura, H. Matsuhata, and Y. Ikuhara, “Structure analysis of GaN thin film with inversion domains by high voltage atomic resolution microscopy,”
    Mater. Trans., 43[7], 1542-1546(2002).

  11. A. Kimura, Y. Azuma, T. Suzuki, T. Saito, and Y. Ikuhara, “Microstructure of diamond-like carbon films prepared by cathodic arc deposition,”
    Diam. Relat. Mater. , 11[7], 1436-1440(2002).

  12. A. Kuwabara, J. Katamura, Y. Ikuhara, and T. Sakuma, “Influence of interaction between neighboring oxygen ions on phase stability in cubic zirconia,”
    J. Am. Ceram. Soc., 85[10], 2557-2561(2002).

  13. A. Kuwabara, S. Yokota, Y. Ikuhara, and T. Sakuma, “Local bonding states of titanium and germanium-doped tetragonal zirconia polycrystal and their correlation to high temperature ductility,”
    Mater. Trans., 43[10], 2468-2472(2002).

  14. K. Matsunaga, Y. Iwamoto, and Y. Ikuhara, “Atomic structure and diffusion in amorphous si-b-c-n by molecular dynamics simulation,”
    Mater. Trans., 43[7], 1506-1511(2002).

  15. K. Nakagawa, G. Pezzotti, K. Ota, Y. Ikuhara, H. Yoshida, and T. Sakuma, “Internal friction behavior of alumina polycrystals with engineered grain boundaries,”
    Mater. Trans., 43[7], 1557-1560(2002).

  16. A. Nakamura, T. Yamamoto, and Y. Ikuhara, “Direct observation of basal dislocation in sapphire by HRTEM,”
    Acta Mater., 50[1], 101-108(2002).

  17. A. Nakamura, T. Yamamoto, Y. Ikuhara, “High Temperature Deformation and Dislocation Structure of α-Al2O3 Single Crystals,”
    Journal of the Society of Materials Science, Japan, 51[6], 617-621(2002).

  18. H. Nishimura, Y. Ikuhara, K. Ota, and G. Pezzotti, “Internal friction analysis of CaO-doped silicon carbides,”
    Mater. Trans., 43[7], 1552-1556(2002).

  19. F. Oba, T. Yamamoto, Y. Ikuhara, I. Tanaka, and H. Adachi, “First-principles calculations of Co impurities and native defects in ZnO,”
    Mater. Trans., 43[7], 1439-1443(2002).

  20. T. Saito, H. Kwamoto, T. Yamamoto, Y. Ikuhara, “Lattice Defect in Polished Sapphire and Precise Measurement of Local Strain,”
    Journal of the Society of Materials Science, Japan, 51[6 ], 604-609(2002).

  21. K. Sasaki, M. Nakano, Y. Ikuhara, and T. Sakuma, “Pre-holed tensile specimens for superplastic Y-TZP ceramics,”
    J. Mater. Sci., 37[15], 3307-3313(2002).

  22. Y. Sato, F. Oba, T. Yamamoto, Y. Ikuhara, and T. Sakuma, “Current-voltage characteristics across [0001] twist boundaries in zinc oxide bicrystals,”
    J. Am. Ceram. Soc., 85[8], 2142-2144(2002).

  23. J. Shibata, T. Honjo, H. Fuji, T. Araki, I. Hirabayashi, T. Hirayama, T. Izumi, Y. Shiohara, T. Yamamoto, and Y. Ikuhara, “Crystallization mechanism of Nd1+x,Ba2-xCU3O7-y and YB2CU3O7-y films deposited by metalorganic deposition method using trifluoroacetates,”
    J. Mater. Res., 17[6], 1266-1275(2002).

  24. J. Shibata, T. Honjo, H. Fuji, R. Teranishi, T. Izumi, Y. Shiohara, T. Yamamoto, and Y. Ikuhara, “Transmission electron microscopic studies on the growth mechanism of YBa2Cu3O7-y and Nd1+xBa2-xCu3O7-y films formed by metalorganic deposition method using trifluoroacetates,”
    Physica C-Supercond., 378, 1039-1044(2002).

  25. J. Shibata, H. Yamamoto, S. A. Kulinich, T. Yamamoto, K. Terashima, T. Yoshida, and Y. Ikuhara, “Transmission electron microscopic studies of LiNb0.5Ta0.5O3 films deposited on sapphire substrates by thermal plasma spray CVD (microstructure of LiNb0.5Ta0.5O3 films deposited by thermal plasma spray CVD),”
    Mater. Trans., 43[7], 1517-1524(2002).

  26. N. Shibata, N. Morishige, T. Yamamoto, Y. Ikuhara, and T. Sakuma, “Stacking-fault formation in 001 small-angle symmetric tilt grain boundaries in cubic zirconia bicrystals,”
    Phil. Mag. Lett., 82[4], 175-181(2002).

  27. N. Shibata, F. Oba, T. Yamamoto, Y. Ikuhara, and T. Sakuma, “Atomic structure and solute segregation of a Sigma=3, 110 /{111} grain boundary in an yttria-stabilized cubic zirconia bicrystal,”
    Phil. Mag. Lett., 82[7], 393-400(2002).

  28. R. Teranishi, H. Fuji, T. Honjo, Y. Nakamura, T. Izumi, Y. Shiohara, J. Shibata, T. Yamamoto, Y. Ikuhara, and M. Yoshimura, “Growth mechanism of Y123 film by MOD-TFA process,”
    Physica C-Supercond., 378, 1033-1038(2002).

  29. Y. Tsuru, Y. Yashima, A. Sawata, Y. Murakami, and Y. Ikuhara, “Influence of SiO2 and Fe2O3 on properties and microstructure of beta ''-alumina,”
    J. Ceram. Soc. Jpn, 110[2], 102-107(2002).

  30. T. Watanabe, H. Yoshida, Y. Ikuhara, T. Sakuma, H. Muto, and M. Sakai, “Grain boundary sliding and atomic structures in alumina bicrystals with 0001 symmetric tilt grain boundaries,”
    Mater. Trans., 43[7], 1561-1565(2002).

  31. T. Yamamoto, F. Oba, Y. Ikuhara, and T. Sakuma, “Current-voltage characteristics across small angle symmetric tilt boundaries in Nb-doped SrTiO3 bicrystals,”
    Mater. Trans., 43[7], 1537-1541(2002).

  32. H. Yoshida, Y. Takigawa, Y. Ikuhara, and T. Sakuma, “Effect of chemical bonding state on high-temperature plastic flow behavior in fine-grained, polycrystalline cation-doped Al2O3,”
    Mater. Trans., 43[7], 1566-1572(2002).

  33. H. Yoshida, Y. Ikuhara, and T. Sakuma, “Grain boundary electronic structure related to the hightemperature creep resistance in polycrystalline Al2O3,”
    Acta Mater., 50[11], 2955-2966(2002).

  34. H. Yoshida, T. Yamamoto, Y. Ikuhara, and T. Sakuma, “A change in the chemical bonding strength and high-temperature creep resistance in Al2O3 with lanthanoid oxide doping,”
    Phil. Mag. A, 82[3], 511-525(2002).

  35. G. D. Zhan, Y. Ikuhara, M. Mitomo, R. J. Xie, T. Sakuma, and A. K. Mukherjee, “Microstructural analysis of liquid-phase-sintered beta-silicon carbide,”
    J. Am. Ceram. Soc., 85[2], 430-436(2002).